Grey Porcelain Tiles Outdoor

Product Specification

SINTERED STONE, which means "sintered stone",

Its hardness exceeds that of igneous rocks such as granite. The rock slab is made of natural stone powder, felsic stone, and other natural raw materials, through special technology,

With the help of presses over 36,000 tons, with NDD technology,

After being fired at a high temperature above 1200℃,

A new type of stone material with large specifications that can withstand various high-strength processing processes.

Rock slabs are available in 1800×900mm, 2400×1200mm, 2600×800mm, 2600×1200mm, 760×2550mm, 2700×1600mm, 3200×1600mm, 3600×1600mm, and other specifications, with thicknesses of 6mm, 9mm, 11mm, 12mm, 15mm, 20mm.

As a new type of material, compared with other traditional materials, Grey Porcelain Tiles Outdoor has eight advantages:

(1) Safety and hygiene: It can be in direct contact with food, pure natural materials, 100% recyclable, non-toxic, and non-radiation, and at the same time fully consider the needs of human sustainable development, health, and environmental protection.

(2) Fire resistance and high-temperature resistance: Direct contact with high-temperature objects will not deform, A1 grade fireproof rock slab will not produce any physical changes (shrinkage, cracking, discoloration), and will not emit any gas or odor when encountering an open flame at 2000 ℃..

(3) Antifouling: The water seepage rate of one ten-thousandth is a new indicator in the field of man-made building materials. While stains cannot penetrate, it does not give bacteria breeding space.

(4) Scratch resistance: Mohs' hardness exceeds 6 degrees, which can resist scratches and attempts to scratch.

(5) Corrosion resistance: resistance to various chemical substances, including solutions, disinfectants, etc.

(6) Easy to clean: It can be cleaned up only by wiping with a wet towel. There is no special maintenance requirement, and the cleaning is simple and fast.

(7) All-round application: breaking the application boundary, marching from decorative materials to applied materials, design, processing and application are more diversified and extensive and meet high-standard application requirements.

(8) Flexible customization: The texture of the rock slab is rich and varied, and it can be customized according to the needs of users. Attachment: Performance comparison table of different decorative materials (according to the test results of different materials)

Basic Info

Product Details

Quality Control

We are committed to being positive & aggressive in our attitude towards quality and customer service. We will not allow quality to take second place behind cost or schedule as this is our basic strategy for growth.

* Inclusions: 

No more than two (2) pits, inclusions, contaminants, voids, or bubbles at a maximum diameter of 1.5 mm are allowed on a 1220mm X 2440mm sheet.

* All sheets are to be covered with protective masking.

* Surface: 

No more than two (2) scratches, scuffs, streaks, irregularity, or texture flaws at a maximum length of 3 mm are allowed on a 1220mm X 2440mm sheet. Surface damage will be evidenced by damages in protective masking.

* Top material surface is to be planed and smooth with no evidence of machine lines.

* Bottom material surface is permitted to be course with machine patterns.

* Aesthetics:

Bubbles or white spots:

Must be limited to 50mm in diameter to any single area on a sheet

Only two (2) bubble or white spot areas are permitted per sheet.

No single color within a shipped order may contain more than 10% of sheets with bubbles or white spots – even if the above specifications per sheet are maintained.

* Flatness: No more than 3 mm of bowing from the center of the panel to any exterior edge.

* Chips/Cracks: No chips or cracks on the corners or edges of the panel are tolerable.

Delivery, Shipping, And Service

1.Slab: plastic inside + strong seaworthy wooden bundle outside

2.tile: foam inside + strong seaworthy wooden crates with reinforced straps outside

3.Countertop: foam inside + strong seaworthy wooden crates with reinforced straps outside

4.sink/ mosaic/ cut-to-size:

foam & carton box inside + strong seaworthy wooden crates with reinforced straps outside

Shipping: Xiamen Port.

We have our own shipping company. We can offer you the best service and price for the shipment.

FAQ

1) Q: What's your sample policy and sample lead time?

A: Small samples are free. Even the courier fee will be refunded after you place the order. The lead time for a small sample is 1~3 days.

2) Q: What's your MOQ?

A: For Slabs & Tiles, usually in 100 m2.

B: Other items depend, such as tombstones can be MOQ 1 Set, Baluster 10 pieces, etc.

3) Q: How do I know the quality of the products?

A: We'll send you the order update and product pictures for you to see for yourself. QC inspection by yourself / your friend / 3rd QC agent is accepted.

4) Q: What's your payment term?

A: 30% deposit by TT, balance against copy of B/L.

5) Q: What's your production lead time?

A: The normal lead time is around 3 weeks for one 20' GP. Faster lead time is available upon confirmation.