Sand Beat Plate Quartz Which is better, a sand-making machine or a hammer break?
Quartz is a hard rock that is typically hammered into the sand to create plate sand, glass, or powder. So, which equipment should be used in the quartz sand beating process? Is it a sand-making machine or a hammer break?
First, Sand-making Machine Characteristics
The sand-making machine employs a mixture of the "stone hitting stone" and "stone hitting iron" principles, and the material has good granularity; however, the iron content is difficult to control. In general, the jaw crusher will smash quartz into three or eight pieces, which will subsequently enter the cavity of the sand-producing machine for medium and fine crushing. It is possible to generate 20-40 mesh, 30-50 mesh, 60-120 mesh, and 200 mesh.
1. The sand making machine's impeller has a four-port design to improve material throughput and material impact probability; the bearing cylinder has a unique exhaust and dustproof device and sealing structure to prevent dust from entering the lower bearing cover and causing oil leakage, and the lower part of the body has been changed from a "well" structure to a "ten" structure to prevent material from blocking the discharge channel.
2. Intelligent thin oil lubrication control
With thin oil lubrication and an air-cooling system controlled by a PLC and an intelligent instrument, fully automatic lubrication control is possible, and lubrication temperature can be regulated and controlled, providing more optimum operating conditions for the bearings.
3. Standard fitted with a self-raising arm, co-axial with a lifting arm, convenient for impeller and bearing barrel maintenance; lifting the feeding hopper with a hydraulic jack, simple to maintain; guardrail height is reduced to avoid interference when the feeding hopper is rotated open.
Second, consider the hammer break properties.
Hammer break to play quartz sand, huge capacity, once produced, the completed product has a low iron content, but the hammerhead is easy to wear, resulting in high maintenance costs afterward.
1 advantage: high crushing ratio (usually 10-25, but can go up to 50), high production capacity, and consistent product.
2, disadvantages: hammerhead and castor screen wear quickly, require extensive maintenance and balance time, and wear quicker when crushing hard materials; while crushing sticky wet materials, it is easy to block the castor screen slit, resulting in downtime (the water content of the material should not exceed 10 percent ).
3Because of the unique design of the quartz stone hammer crusher crushing cavity shape and grate screen mechanism, it is well adapted to quartz stone with high water content, effectively resolving the problem of quartz stone clinging to the inside of the equipment.
4The crushing ratio of the equipment is considerable, normally 10-25, but it can sometimes reach 50, and the particle size of the crushed quartz stone is quite consistent, with very few over-powder phenomena.
Three, the classification of quartz sand
1. Ordinary quartz sand with a particle size range of 5220 mesh
2, Refined quartz sand having a particle size range of 5480 mesh.
3, High purity quartz sand with particle sizes ranging from 40-70 to 70-140 mesh.
4, Fused quartz sand: physical features include a colorless, translucent block look.
